Infexit Aqua

To effectively and efficiently organic deposites in the drinking water system.

Measured value

Specifications

Unit

Parameters

49.5

49-51

m/m%

Hydrogen proxid contect

83

80-120

Mg/l

Silver content

 

Introduce a 1-3 % solution of Infexit Aqua and pump it.

Make sure there is adequate air release out of the system.

Remove the cap at the end of the system and check by the fizzling reaction whether Infexit Aqua reached to the end.

Raise all nipples or cups.

Allow the system to be fully filled for a minimum of 12 hours.

Flush the system with plenty of water One again eaise all nipples or pipes.

Cleaning an operation system:Birds present

Set your dosage pump to 1%

Mix Infexit Aqua with water

Put the filter of your dosage pump in the stock solution

Then after every 2 days the mixture must be increased to the contents see below.

Day7-10

Day5&6

Day3&4

Day1&2

 

5liters

5liters

5liters

5liters

Water

200ml

150ml

100ml

50ml

Infexit Aqua

 

After ten days your sydtem will be clean again.

Too high dosages of Infexit Aqua may cause reduced water intake.When this occurs, the dosage rate must be decreased.

Do this at least once a week.

Always after vaccination, medication or water soluble additives.

Before cleaning your system, you must have closed the system first.

Store in original container in cool and ventilated area, protected from heat and direct insolation.